Your Reliable and Promising Partner

    Tecpel Home page

    		Tecpel test instruments
    *

    200 KHz LCR Meter  w/RS-232 Interface

    Model : LCR-200

    bench lcr meter

    Model: LCR 200

    FEATURES :
    Measurement Parameters : Z , Ls , Lp , Cs , Cp , DCR , ESR , D , Q , and θ.

    Test conditions : 100MHz , 120Hz , 1KHz , 10KHz , 100KHz , 200KHz Basic Accuracy 0.1% ; Test Voltage: 1Vrms , 250mVrms , 50mVrms , 1Vdc(DCR only)

    DMM Functionalities
    Dual LCD Display with LED backlit
    Open/Short Calibration
    Remote Binning capacity
    Auto range/ Range hold selection
    RS-232 Interface
    　
    　
    DM  Information DATA  SHEET
    　
    　
     LCR 200 Precision LCR Instrument
    SPECIFICATIONS        CE  Mark Safety Approval

    TEST CONDITON

    Frequency

    100Hz/120Hz/1KHz/10KHz/100KHz/200KHz

    Level
    1V rms/250mVrms/50mVrms/1Vdc(DCR only)
    Measurement Parameters
     Z , Ls , Lp , Cs , Cp , DCR , ESR , D , Q , and θ.
    Basic Accuracy
    0.1%

    PRIMARY PARAMETERS DISPLAY

    Z
    AC Impedance
    DCR
    DC Resistance
    Ls
    Serial Inductance
    Lp
    Parallel Inductance
    Cs
    Serial Capacitance
    Cp
     Parallel Capacitance

    SECONDARY PARAMETERS DISPLAY

    θ
     Angle Impedance
    ESR
    Equivalent Series Resistance
    D
    Dissipation Factor
    Q
    Quality Factor

    COMBINATIONS OF Display

    Serial Mode
    Z- θ, Cs-D, Cs-Q, Cs-ESR, Ls-D, Ls-Q, Ls-ESR
    Parallel Mode
    Cp-D, Cp-Q, Lp-D, Lp-Q

    MEASUREMENT RANGE

    Parameter
    Range
    z
    0.000 Ohm to 500.0 Ohm
    L
    0.030 uH to 9999 H
    C
    0.003 pF to 80.00 mF
    DCR
    0.000 Ohm to 500.0 M Ohm
    ESR
    0.000 Ohm to 9999 Ohm
    D
    0.000 to 9999
    Q
    0.000 to 9999
    θ
    -180.0 degree to 180 degree
    V
    0.000mV to +/- 600.0V
    ESR
    0.000 Ohm to 9999 Ohm
    D
    0.000 to 9999
    Q
    0.000 to 9999
    θ
    -180.0 degree to 180 degree
    V
    0.000mV to +/- 600.0V
    I
    0.000mA to +/- 2.000A

    DC VOLTAGE MEASUREMENT

    Range
    2V, 20V, 200V and 600V
    Resolution
    1mV, 10mV, 100mV, 1V
    Accuracy
    +/- (0.4% +3 digits)
    input Impedance
    1 M Ohm

    AC CURRENT MEASUREMENT

    Range
    2A, 0.2A, 20mA and 2mA
    Resolution
    1mA, 10mA, 100mA, 1A
    Accuracy
    +/-(0.8% +5 digits) @ 40 Hz ~ 1 kHz
    Input Impedance
    1M ohm

    AC CURRENT MEASUREMENT ( True RMS)

    Range
    2A, 0.2A, 20mA and 2mA
    Resolution
    1mA, 10mA, 100mA, 1A
    Accuracy
    +/-(0.8% +5 digits) @ 40 Hz ~ 1 kHz
    Current Shunt
    0.1 Ohm@ current > 20mA/ 10 Ohm@ current </= 20mA

    CONTINUITY CHECK

    Continuity Thresh hold
    50 Ohm (Approximately)
    Continuity Indicator
    Tone Buzzer
    Input Protection
    600 Ohm (max)

    DIODE TEST MEASUREMENT

    Test Current
    2.5mA ( Typical)
    Open Circuit Voltage
    5.0V DC (NOMINAL)
    Input Protection
    600V (max)

    DIODE TEST MEASUREMENT

    Power source
    AC 110/ 220V +/- 10% ; 50 / 60 Hz
    Operating Temp
    0 to 40 deg C (Operating) ; < 85 % RH
    Storage Temp
    -20 deg to 70 deg C

    GENEARL

    Dimensions:
    300 mm x 220 mm x 150 mm ( 11.8" x 8.7" x 5.9 ") (Dx W x H)
    Weight
    4.5 kgs
    Standard Accessories
     (1). TL09C Kelvin Clips x 1 pc ( 2) Test Leads  x 1 pc     Power Cord x 1    ;  Instruction Manaul x 1
    Optional Accessories
      (3) TL09A SMD test Probe ( 4) TL 09B Component Fixture lcr meter component fixture

    Click below  for more information.

    TECPEL CO., LTD.

    E-MAIL : sales@tecpel.com ; oka@oka.com.tw
    Tel : 886 (2)2737-5866 FAX : (02)2737-3343
    Web-site: http://www.tecpel.com ; http://www.oka.com.tw

    View Site in Mobile | Classic
    Share by: