TECPEL CO., LTD. Tel: 886 2 2218 3111 Fax: 886 2 2218 3222
Handheld LCR Meter
Model: LCR-612
20000 Counts LCR Meter
Dual Display Auto-Ranging
Instroduction:
This handheld RLC METER LCR-612 is designed to measure
the parameters of an impedance element with high accuracy
and speed, measurements of inductance, capacitance,
resistance(equivalent series resistance) and dissipation factor
are provided for over a broad band of ranges. In addition,
you'll find that it is ideal for testing SMD type components
by its optional test lead TL-06.
Plus, the instrument offers advanced features, such as the
ability to perform precision measurements of very low resistance
with the 20 ohm ranges(effective reading must over 20 counts,
and ideal for high inductances with the 2000H and 2000uH
ranges, along with the rubber holster, combine to make the unit
the most versatile handheld LCR available today.
With proper care and use, this LCR meter can provide years of
reliable operation.
Features:
-
Basic accuracy: 0.5% for Resistance ;0.7% for Inductance, Capacitance
-
Dual Displays provide quick tested results readouts,with L.C.R. Display values up to 19999 counts and Q.D.R. display values up to 9999 counts (Auto range)
-
Excellent resolutions: Resistance up to 0.001W, Inductance Capacitance up to 0.1uH/0.1pF
-
Provided up to 4 testing parameters:
-
Ls+(Q,D,Rs), Lp+(Q,D,Rp) ; Cs+(Q,D,Rs), Cp+(Q,D,Rp)
-
Auto-Power Off function:
-
To conserve battery life for longer use.
-
Fuse detection function:
-
To inform that the fuse is open or damaged.
-
PC communication port: (Only for Model LCR 612R ) Provide optical standard RS-232. cable
-
External DC Adapter functions:
-
Use of a DC adapter can also serve to disable Auto Power Off function.
-
The test lead TL-06 (Option) is specially designed for measuring SMD (Surface mount device) resistor, capacitor and inductor
Specifications :
Display:
L\C\R 4 digits, maximum reading of 19999.
Q\D\R 4 digits, maximum reading of 9999. (Auto range).
Capacitance Ranges:
| 8 Ranges | 1KHz Accuracy | 120Hz Accuracy |
| 20 mF | Nil | +/-(5.0 %+5 Counts)/(DF<0.1) |
| 2000 uF | +/-(5.0 %+5counts)/(DF<0.1) | +/-(1.0 %+5 counts)/(DF<0.1) |
| 200 uF | +/-(1.0 %+3 counts)/(DF<0.5) | +/-(0.7 %+3counts)/(DF<0.5) |
| 20 uF | +/-(0.7 %+3 counts)/(DF<0.5) | +/-(0.7 %+3 counts)/(DF<0.5) |
| 2000 nF | +/-(0.7 %+3 counts)/(DF<0.5) | +/-(0.7 %+3 counts)/(DF<0.5) |
| 200 nF | +/-(0.7 %+5 counts)/(DF<0.5) | +/-(0.7 %+5 counts)/(DF<0.5) |
| 20 nF | +/-(0.7 %+5 counts)/(DF<0.5) | +/-(1.0 %+5 counts)/(DF<0.1) |
| 2000 pF | +/-(1.0 %+5 counts)/(DF<0.1) | Nil |
Resolution up to 0.1 pF
Inductance Ranges:
| 8 Ranges | 1KHz Accuracy | 120Hz Accuracy |
| 10000 H | Nil | No specified |
| 2000 H | No specified | +/-(1.0%+5 counts) |
| 200 H | +/-(1.0%+5 counts) | +/-(0.7% + 5 counts) |
| 20 H | +/-(0.7 %+5 counts) | =/-(0.7%+5 counts) |
| 2000 mH | +/-(0.7 %+5 counts) | +/-(0.7%+5 counts) |
| 200 mH | +/-(0.7 %+5 counts) | +/-(1.0%+5 counts) |
| 20 mH | +/-(1.2%+5 counts) | +/-(2.0%+5 counts) |
| 2000 uH | +/-(2.0%+5 counts) | Nil |
Resolution up to 0.1uH
Resistance Ranges:
| 7 Ranges | 1KHz/ 120 Hz Accuracy |
| 10 M Ohm | +/-( 2.0% +8 counts) |
| 2000 K Ohm | +/- (0.5% + 5 counts) |
| 200 K Ohm | +/- (0.5% + 3 counts ) |
| 20 K Ohm | +/- ( 0.5% + 3 counts) |
| 2 K Ohm | +/- ( 0.5% + 3 counts) |
| 200 K Ohm | +/- ( 0.8% + 5 counts) |
| 20 Ohm | +/- ( 1.2% + 8 counts) |
Resolution up to 0.001
Parameter Measurement:
Ls+(Q,D,Rs), Lp+(Q,D,Rp); Cs+(Q,D,Rs), Cp+(Q,D,Rp)
Overload:
"OL" is display.
Range Mode:
.
Auto and Manual
Test Frequency:
1KHz and 120Hz.
Measurement rate:
Approx. 1 time per second, nominal.
General
Power Requirement:
(1) Single Standard 9V battery (NEDA 1604, IEC 6F22 006P)
(2). External DC Adapter 12Vmim to 15Vmax / 50mA. (Optional)
Auto Power Off:
The meter key switch inactive for more than 5 minutes, press power key to resume operation.
Overload Protection
0.1A/250V fast below fuse.
Ambient Operating Ranges
0 deg C to 50 deg C(-32 deg F to 122 deg F) < 80% R.H.
Sotragne Temperature
-20 deg C to 60 deg C(-4 deg F to 140 deg F) < 70 % R.H.
Dimensions:
192mm(H) x 91mm(W) x 52.5mm(D).
Weight:
365g. (including accessories)
Accessories:
Comes complete with leads, battery and owners manual.
LCR Test Lead
Model : TL-06 (Option)
Features:
n TL-06 is specially designed for measuring SMD (Surface mount device) resistor, capacitor and inductor
n Suitable for any multimeter with banana terminal input.
Order Information:
Model number:LCR-612 ; Optional test lead LCR-06
