TECPEL CO., LTD. Tel: 886 2 2218 3111 Fax: 886 2 2218 3222
Temp. and humidity Transmitter Wall Type
Model : TRH-301, TRH-302, TRH-303
Temp. and humidity Transmitter Duck Type
Product ID: TRH-301. 302 , 303
Temperature / Humidity Transmitter
TRH-300 series utilizes a thin-film polymer
capacitor to sense relative humidity, and
a thin-film RTD to accurately sense temperature.
TRH-301 Temperature transmitter
TRH-302 Humidity transmitter
TRH-303 Temp./humi. Transmitter
Temp. Humidity Transmitter Seperated Type
Features:
Fast, stable and accurate.
Watertight enclosure.
Compact size, Easy mounting.
Excellent Long-term stability.
Wide input voltage : range.(12Vdc~40Vdc)
Available with either Current or Voltage output.
On-site, Two point calibration. (Zero and span)
TRH-303 is a model in the TRH-300 series that can measure temperature and humidity at the same time. Through voltage or current signals, the measured temperature and humidity values are transmitted to the display panel or displayed on the back-end system. The TRH-300 series utilizes sheet-type polymer capacitors to measure temperature and relative humidity accurately. Excellent design, even moisture, dust, dirt, grease, and common chemicals will not affect its measured value.
| Temperature Humidity Transmitter(Transducer) TRH-301, 302, 303 |
|---|
| SPECIFICATIONS CE Approval |
TRH-301, 302, 303
Measuring Range: 0~100°C (-20~+80°C, 0~50°C, -40~+60°C available) 0~100% RH
Accuracy:(at 25°C) ±2% RH, ±0.3°C
stability: Better than 1% RH per year (Typical)
Temperature compensation: ±0.008% RH / °C (Effect @ 0% RH)
Response time:< 15 seconds (90% at +25°C in moving air at 0.5 M/S )
Senosr Humidity: Thin-film capacitor
Temperature: RTD Pt 100 Ohm DIN, IEC751
Signal output: Humi: 4~20mA Two wire
Temp: 4~20mA Two wire (selectable)
Selectable output signal: 0 to 1 V, 0 to 5 V, 0 to 10 V or 1 to 5V. (option)
Working Voltage:12~36 VDC
Sensor protection: Sensor filter, Part No. TR-3066. (option )
ABS plasticwatertight enclosure (IP 65)
Connection Liquid-tight nylon, cable Bushing: 5-10mm cables
Working ambient: -40~+85°C (-40~+185°F)
Weight:Approx. 150 g
Order Information:
Model :
TRH-301 Temperature transmitter
TRH-302 Humidity transmitter
TRH-303 Temp./humi. Transmitter
Shape (Mounting)
W : Wall Mount Type
D : Duct mount Type
S: Separated Type
Specify: Measuring ranges and output signal Current 4~20mA or Voltage (Option 0~1V, 0~5V, 0~10V, 1 ~5V )
Certificate: CE
TRH-300W (Wall Type); TRH-300D (Duct Type)；TRH-300S (Separated Type)
Temperature /Humidity Transmitter TRH-303 4~20mA Output Application diagram and Instruction :
TRH-303, 4~20mA temp/humidity transmitter
Application Note :
1. One (+) power wire to Hum idity or Temp (+) terminal ; Both Temp/Humidity
2. The signal would be out from the (-) terminal and connect this wire to the (+) terminal of the controller AND
3. The (-) terminal is the connected to the Ground (-) of the power source.
O ur transmitter is a two wire system with the positive (+) as power source and the negative is the Communication Source.
TRH-AI Data logger for Ethernet network operation
Temp. and humidity LED Monitor Display TRH-
3306D with Temp. and humidity transmitter
Tempetature LED Monitor Display with Temperature transmitter
Above illustrated photos are Model TRH-303 Wall type humidity and temperature transmitter. Temperaturate range
is from -20 ~ 80 deg C, 4 ~ 20mA output. Humidity 0 ~ 100% RH. You may specify
(1) What type you need? W, S, or D type,
(2)Output signal Current 4~20mA or Voltage (Option 0~1V, 0~5V, 0~10V, 1 ~5V ),
(3)Temperature ranges: 0~100°C (-20~+80°C, 0~50°C, -40~+60°C available)
Temperature Humidity Tranmitter TRH-303,
Large LED panel display TRH-3306D + VR-71 Voltage Data logger Video Demonstrationt
